IBM Books

Software User's Guide Version 3.4

Tables

  1. Code Features supported in the 2216 Model 400 and Network Utility
  2. Processes, Their Purpose, and Commands to Access
  3. Network Architecture and the Supported Interfaces
  4. OPCON Commands
  5. Change Management Configuration Commands
  6. Quick Config Capabilities
  7. CONFIG Command Summary
  8. Access Permission
  9. IBM 2216 Feature Numbers and Names
  10. Additional Functions Provided by the Set Prompt Level Command
  11. Default and Maximum Settings for Interfaces
  12. GWCON Command Summary
  13. Logging Levels
  14. Packet Completion Codes (Error Codes)
  15. ELS Configuration Command Summary
  16. ELS Net Filter Configuration Commands
  17. ELS Message Buffering Configuration Commands
  18. ELS Monitoring Command Summary
  19. Packet Trace Monitoring Command Summary
  20. ELS Net Filter Monitoring Commands
  21. ELS Message Buffering Monitoring Commands
  22. PERF Configuration Command Summary
  23. PERF Monitoring Command Summary
  24. Token-Ring Configuration Command Summary
  25. Token-Ring 4/16 Valid Packet Sizes
  26. Token-Ring Monitoring Command Summary
  27. FasTR Configuration Command Summary
  28. FasTR Monitoring Command Summary
  29. FDDI Configuration Command Summary
  30. FDDI Monitoring Command Summary
  31. LLC Configuration Command Summary
  32. LLC Monitoring Command Summary
  33. Ethernet Configuration Command Summary
  34. Ethernet monitoring command Summary
  35. Configurations That May Result in Link Failure on the IBM 2216
  36. Configurations That May Result in Mismatched Duplex Modes During Operation
  37. Ethernet Configuration Command Summary
  38. Ethernet Monitoring Command Summary
  39. ATM Configuration Command Summary
  40. ATM INTERFACE Configuration Command Summary
  41. ATM Virtual Interface Configuration Command Summary
  42. ATM monitoring command Summary
  43. ATM INTERFACE monitoring command Summary
  44. ATM LLC Configuration Command Summary
  45. LAN EMULATION Client Configuration Commands Summary
  46. LAN Emulation Client Configuration Commands Summary
  47. ATM LAN Emulation Client ARP Configuration Commands Summary
  48. ATM LAN Emulation Client ARP Config Commands Summary
  49. LLC Command Summary
  50. LE Client Monitoring Command Summary
  51. LLC Monitoring Command Summary
  52. Channel Interface Configuration Commands
  53. Channel Interface Monitoring Commands
  54. Channel Adapter LCS Interface Monitoring Commands
  55. Channel Adapter LSA Interface Monitoring Commands
  56. Channel MPC+ Interface Monitoring Commands
  57. Set Command
  58. National Enable Parameters
  59. National Set Parameters
  60. Establishing Incoming X.25 Circuits for Closed User Groups
  61. X.25 Configuration Commands Summary
  62. Line Speeds When Internal Clocking is Used for 2216 Interfaces
  63. Line Speeds When External Clocking is Used for 2216 Interfaces
  64. Example VC Definitions
  65. X.25 Monitoring Command Summary
  66. XTP Configuration Commands Summary
  67. XTP Monitoring Commands Summary
  68. Protocol Address Mapping
  69. Data Generated by a Voice Port
  70. Frame Relay Management Options
  71. Frame Relay Configuration Commands Summary
  72. Line Speeds When Internal Clocking is Used for 2216 Interfaces
  73. Line Speeds When External Clocking is Used for 2216 Interfaces
  74. Frame Relay Management Options
  75. Transmit Delay Units and Range for the 2216 Serial Interface
  76. Frame Relay Monitoring Commands Summary
  77. LCP Packet Codes
  78. Point-to-Point Configuration Command Summary
  79. Cable types for 2216 Interfaces
  80. Line Speeds When Internal Clocking is Used for 2216 Interfaces
  81. Line Speeds When External Clocking is Used for 2216 Interfaces
  82. Point-to-Point Monitoring Command Summary
  83. MP Configuration Commands
  84. MP Monitoring Commands
  85. SDLC Relay Configuration Commands Summary
  86. Cable Types for 2216 Interfaces
  87. Valid Values for Frame Size in Set Frame-Size Command
  88. Line Speeds When Internal Clocking is Used for 2216 Interfaces
  89. Line Speeds When External Clocking is Used for 2216 Interfaces
  90. SDLC Relay Monitoring Commands Summary
  91. SDLC Configuration Commands Summary
  92. Cable types for 2216 Interfaces
  93. Valid Values for Frame Size in Link Frame-Size Command
  94. Line Speeds When Internal Clocking is Used for 2216 Interfaces
  95. Line Speeds When External Clocking is Used for 2216 Interfaces
  96. SDLC Monitoring Commands Summary
  97. V.25 bis Configuration Commands Summary
  98. V.25 bis Monitoring Command Summary
  99. ISDN Q.931 Cause Codes
  100. ISDN Configuration Command Summary
  101. ISDN Cause Codes Command Summary
  102. ISDN Monitoring Command Summary
  103. Dial Circuit Configuration Commands Summary
  104. Dial Circuit Configuration Commands Summary

[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]